Fire Box EFB-2000

The EFB-2010 Fire Box has an ace cylinder lock with an additional hole to accept a Knox KS-2 key lock, which can be purchased from your local Fire Department. This model also provides ample room inside for placement of gate release keys as a back up to the micro switch. Part# EG064

Fire Box EFB-2000

Fire Department Approved

  • 14 gauge steel construction with red powder coat
  • Labeled FIRE DEPT. in white
  • Front door has a hole for a standard pad lock which can be removed by the Fire Department
  • Blank label on the inside of the door is provided for written instructions
  • Built in switch for gate activation

The EFB-2070 Fire Box uses a chain release device. Simply pulling the chain will release the gate and allow it to open. The chain release kit is included with this model but can also be bought separately. Part# EG068

Fire Box EFB-2070

Fire Box EFB-2010

  • 14 gauge steel construction with red powder coat
  • Labeled FIRE DEPT. in white
  • Accepts Knox KS-2 key switch
  • Dimensions: 6″ (H) x 5 1/2″ (W) x 3″ (D)

Fire Boxes

Laredo, TX - 1-800-996-2966

Laredo Texas - (956)712-0039

Three Rivers Texas - (361)786-6024

Three Rivers, TX - 1-844-502-4327


The EFB-2000 Fire Box provides the Fire Department access through your automated gate with the use of a micro switch which can be set for not open or closed operation. The front door has a hole for a pad lock to be secured. The Fire Dept. will be able to remove the pad lock to be able to activate your gate. This model provides ample room inside for placement of gate release keys as a back up to the micro switch. Part# EG060

Specs

Fire Box EFB-2070

Fire Box EFB-2010

  • 14 gauge steel construction with red powder coat
  • Labeled FIRE DEPT. in white
  • Accepts Knox KS-2 key switch
  • Dimensions: 6″ (H) x 5 1/2″ (W) x 3″ (D)